Brocade Communications Systems 8 Command Reference Manual page 986

2
sysMonitor
To display the Fabric Watch configuration for temperature:
To display current temperature values:
To configure Fabric Watch custom thresholds for flash memory:
To apply the custom thresholds for flash memory:
To display the Fabric Watch configuration for flash memory:
954
switch:admin>sysmonitor --show env -area temp
Class: ENV
Area : TEMP
ThLevel : Def
ActLevel: Def
High :
Custom:
Default:
Low:
Custom:
Default:
Buffer:
Custom:
Default:
switch:admin>sysmonitor --show env -area temp -c
Class |Area |PortNo|C#
---------|-------|------|----|---------|-------
ENV |TEMP |000001|n/a |39
ENV |TEMP |000002|n/a |35
ENV |TEMP |000003|n/a |42
ENV |TEMP |000004|n/a |44
switch:admin>sysmonitor --config env -area resource -highthreshold -value 100
switch:admin>sysmonitor --apply env -area temp -thresh_level cust
switch:admin>sysmonitor --show resource
Class: RESOURCE
Area : FLASH
ThLevel : Cust
ActLevel: Cust
High :
TimeBase: None
Value : 65
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog,SNMP
TimeBase: None
Value : 65
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog,SNMP
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Value : 10
Value : 10
|Value |State
|InRange
|InRange
|InRange
|InRange
Fabric OS Command Reference
53-1001764-02