Brocade Communications Systems 8 Command Reference Manual page 374

2
firmwareKeyUpdate
user
keyfile
passwd
Examples To update the public key from a server, using an automatically determined transfer protocol:
To update the public key using the interactive method:
To update the public key from an external USB device:
See Also firmwareDownload, firmwareKeyShow, configure
342
Specify a user name for FTP or SSH server access. This operand can be
omitted, if the firmware key is accessible on a local directory or by anonymous
FTP server access. A user name other than "anonymous" is required for SSH
server access.
Specify a fully qualified path for the firmware keyfile. Absolute path names
may be specified using forward slashes (/). When updating from a USB
device, the keyfile must reside in the
device.
Specify a password. This operand can be omitted, if firmware is accessible
through a local directory or an attached USB device, or if no password is
required by the FTP server. This operand is required when accessing an SSH
server.
switch:admin> firmwarekeyupdate 192.168.21.34,johndoe,/pub/dist/pubkey.pem,12345
Updating the public key, please wait...
Public key successfully updated.
switch:admin> firmwarekeyupdate
Server Name or IP Address: 192.168.21.34
User Name: johndoe
File Name: /pub/dist/pubkey.pem
Network Protocol(1-auto-select, 2-FTP, 3-SCP) [1]:
Password:
Updating the public key, please wait...
Public key successfully updated.
switch:admin>firmwarekeyupdate -U /usb/usbstorage/brocade/firmwarekey/pubkey.pem
Updating the public key, please wait...
Public key successfully updated.
directory on the USB
/firmwarekey
Fabric OS Command Reference
53-1001764-02