Brocade Communications Systems 8 Command Reference Manual page 785

To display the ARP tables on the Brocade 7800:
To show the ARP entries with local MAC address for a GbE port on the Brocade 7500:
To display the VLAN tagging configurations on a Brocade 7800:
Function Commands supported only on the Brocade 7800 and the Brocade FX8-24
Synopsis portshow option [ all |[slot]ve_port]] arguments [optional_arguments]
Description Use this command to display configuration parameters and status information for FCIP tunnels and
FCIP circuits on the GbE/10GbE ports on the Brocade 7800 and FX8-24 platforms. The FCIP
tunnels on the local and remote GbE ports act as Virtual E_Ports (VE_Ports) connecting the local
and remote fabrics. The following display options are supported on these platforms:
•
Fabric OS Command Reference
53-1001764-02
switch:admin> portshow arp ge0
Port: ge0
IP Address
------------------------------------------------------
192.168.0.10
192.168.0.11
192.168.0.250
2000::10
2000::11
2000::1:250
switch:admin> portshow arp ge5
No Arp Entries found
switch:admin> portshow arp 12/ge0 -lmac
Port: ge0
Local MAC Address: 00:05:1e:35:1e:e5
IP Address Mac Address
------------------------------------------------------
192.168.15.20 00:05:1e:37:0f:a5
switch:admin> portshow vlantag ge0
Port: ge0
Interface Address
Destination Address
-------------------------------------------------------------
192.168.2.10
0.0.0.0
192.168.0.20
192.168.0.10
192.168.0.21
192.168.0.11
2000::20
2000::10
2000::21
portShow fciptunnel - Displays Fibre Channel over IP (FCIP) tunnels including the following:
-
Additional performance information
Mac Address
00:05:1e:c3:f0:1a
00:05:1e:c3:f0:1a
00:00:00:00:00:00
00:05:1e:c3:f0:1a
00:05:1e:c3:f0:1a
00:00:00:00:00:00
Flags
Permanent Resolved
VlanId L2CoS
200
100
200
300
400
2000::11
portShow
Flags
Resolved
Resolved
Resolved
Resolved
Flags
5 Perm Net
0 Perm
0 Perm
0 Perm
0 Perm
2
753