Diagretry - Brocade Communications Systems 8 Command Reference Manual

Fabric os command reference manual supporting fabric

Hide thumbs Also See for 8:

Table of Contents

diagRetry

Sets or displays diagnostic retry mode.

diagretry [mode | -show]

Use this command to enable retry mode if the mode value is nonzero and to disable the retry mode

if the mode value is 0. The mode is saved in flash memory (and stays in that mode) until the next

execution of diagRetry. The mode becomes active as soon as this command is executed; it does not

require a reboot to take effect.

Retry mode modifies the behavior of the diagnostic test methods, power-on self-test (POST), and

burn-in scripts. The exact behavior depends on the tests and scripts that are run.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

This command has the following optional operands:

If no operand is specified, the current value is displayed.

To view and modify the current retry mode value: