Brocade Communications Systems 8 Command Reference Manual page 786

2
portShow
•
•
Operands This command has the following operands:
slot
ve_port
all
fciptunnel
fcipcircuit
754
-
FICON configuration parameters
-
IPSec status and key
-
Circuits with the tunnel
-
QoS statistics including performance for each priority
-
FCIP Tunnel hierarchy listing circuit IDs and TCP connection information for the tunnel
portShow fcipcircuit - Displays status and configuration for FCIP circuits:
-
TCP statistics for the circuit
-
Circuit-level VLAN tagging configuration
-
Circuit-level Differentiated Services (DSCP) markings
portShow xtun - Displays FICON and FCP emulation statistics and current runtime conditions.
For bladed systems only, specifies the slot number of the VE_Port to be
displayed, followed by a slash (/).
Displays information for a single specified FCIP tunnel. On the Brocade
7800/FX8-24, specify the VE_Port number associated with the tunnel
configured on one of the GbE ports. VE_Ports are numbered 16-23 on the
Brocade 7800 and 12-31 on the Brocade FX8-24 blade.
Displays information for all configured FCIP tunnels.
Displays configuration and status per FCIP tunnel. The following operands are
supported with fciptunnel and fcipcircuit.
-c | --circuit Displays the FCIP circuits within the tunnel. This operand can be used with
any other operand to include circuit displays.
-t | --tcp Displays the TCP statistics for the circuit. The -c option must be specified
with this option.
-p | --perf Displays additional performance information for the specified FCIP tunnels.
-q | --qos Displays the QoS statistics including performance for each priority. This
operand is optional with the --perf option.
-i | --ipsec Displays IPSec status (enabled or disabled) and key if enabled. This option is
valid for portShow fciptunnel only.
-h | --hier Displays the FCIP tunnel hierarchy listing basic circuit IDs and TCP connection
information for the tunnel.
Displays FCIP circuit configuration and status. The following operands are
supported with portShow fcipcircuit:
circuit_ID Specifies a single circuit within the FCIP tunnel. The circuit ID is an integer
value between 1 and 19 on the Brocade FX8-24 and 1 and 7 on the Brocade
7800. This operand is required.
-t | --tcp Displays the TCP statistics for the specified circuit.
-p | --perf Displays additional performance information for the specified FCIP circuit.
-q | --qos Displays the QoS statistics including performance for each priority. This
operand is optional with the --perf option.
Fabric OS Command Reference
53-1001764-02