Brocade Communications Systems 8 Command Reference Manual page 385

To enable the iSCSI service:
To disable the iSCSI service:
To enable Virtual Fabrics:
To disable Virtual Fabrics:
To enable the Ethernet Switching service:
To disable the Ethernet Switching service:
See Also fcrConfigure, iscsiCfg, iscsiPortCfg, isnscCfg, switchShow
Fabric OS Command Reference
53-1001764-02
switch:admin> fosconfig --enable iscsi
iSCSI service is enabled
switch:admin> fosconfig --disable iscsi
iSCSI service is disabled
switch:admin> fosconfig --enable vf
WARNING: This is a disruptive operation that requires a reboot to take
effect.
All EX ports will be disabled upon reboot.
Would you like to continue [Y/N]y
switch:admin> fosconfig --disable vf
WARNING: This is a disruptive operation that requires a reboot to take
effect.
Would you like to continue [Y/N]y
switch:admin> fosconfig --enable ethsw
WARNING: This operation will enable the Ethernet Switch Service on this
switch.
Would you like to continue [Y/N]: y
Enabling the Ethernet Switch Service. Please wait ...
Create Ethernet switch instance 0
All service instances in sync.
The Ethernet Switch Service has been enabled.
Please enable all of the Blades with ID 74 now.
switch:admin> fosconfig
--
WARNING: This is a disruptive operation that requires a reboot to take
effect.
Would you like to continue [Y/N]: y
The Ethernet Switch Service has been disabled.
Your system is being rebooted now.
The system is coming up, please wait...
disable ethsw
2
fosConfig
353