Brocade Communications Systems 8 Command Reference Manual page 355

Part Number
PID
Plant of Manufacture
Port
Port Status
Port Type
Protocol
Registered Node WWN
Registered Port WWN
Sequence Number
Serial Number
Fabric OS Command Reference
53-1001764-02
0x04
0x05
0x06
0x07
0x08
0x09
0x10
0x0b-0xff
Byte CC 0x00
0xID
0xPN
Displays the switch chassis part number.
Displays the 24-bit Fibre Channel port address in 0xDDAAPP format. DD is
Domain ID. AA is Area ID. PP is AL_PA ID.
Displays the manufacturer plant name or code.
Physical port number.
Displays the status of the port:
Link degraded but operational
Link not operational
Displays the port type:
U is unknown.
N is N_Port.
NL is NL_Port.
Displays whether the traffic is using FICON or FCP.
Displays the device's node world wide name associated with the device HBA.
Displays the device's channel or storage CU port world wide name associated
with the device HBA.
Displays the sequence number of the self-describing node.
Displays the switch serial number.
Output unit, if it is a storage port; otherwise, a reserved field for a
channel port
Reserved field for a channel port.
Controller, if it is a storage port; otherwise, a reserved field for a
channel port.
Terminal - Full screen if it is a storage port; otherwise, a reserved
field for a channel port.
Terminal - Line mode if it is a storage port; otherwise, an emulated
control unit support only.
Reserved.
Switch, if it is a switch device; otherwise, reserved.
Reserved.
If storage CU port has registered with the switch.
CHIPID if channel port has registered with the switch.
If switch has registered with the channel, PN represents the FL port
number.
2
ficonShow
323