Brocade Communications Systems 8 Command Reference Manual page 399

TABLE 19
Class
Fabric
FFL_Port (Optical
FFL_Port (Copper)
Resource class
EE Performance Monitor
Filter Performance Monitor
Resource
Notes This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Not all platforms support fans or power supplies. If you attempt to configure values for these items
the following displays: "ERROR: No threshold available.
Operands This command has the following optional operands:
--enable --port port
--disable --port port
Examples To configure thresholds in Fabric OS mode:
Fabric OS Command Reference
53-1001764-02
Access Gateway mode
Enables all thresholds associated with a certain port.
Disables all thresholds associated with a certain port.
switch:admin> fwconfigure
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa performance Monitor class
8 : EE performance Monitor class
9 : Filter performance Monitor class
10 : Security class
11 : Resource class
12 : Quit
Select a class => : (1..12) [1] 1
1 : Temperature
2 : Fan
Area
E_Port downs
Fabric reconfigure
Domain ID changes
Segmentation changes
Zone changes
Fabric<->QL
Fabric logins
SFP state changes
Same as Port class
Same as Port class
Flash area
Invalid CRCS
RX Performance
TX Performance
Customer Defined
Flash
2
fwConfigure
367