Brocade Communications Systems 8 Command Reference Manual page 846

2
portTrunkArea
Examples To enable masterless F_Port trunking on a standalone switch:
1. Disable ports 10-11 by executing portdisable port for each port to be included in the TA.
2. Enable Trunk Area for ports 10-11 with area number 37:
3. Re-enable ports 10-11 by executing portenable port for each port in the TA.
4. Show switch/port information:
5. Display TA-enabled port configuration:
To disable masterless F_Port trunking on ports 10-11:
Disable each port prior to removing ports from the TA. Then reissue the command:
814
trunk Displays configuration details for the port trunk group, including user port,
neighboring user port, and master port properties.
enabled Displays configuration details for all ports included in a user assigned TA (all
ports on which masterless F_Port trunking is enabled).
disabled Displays configuration details for all ports not included in a user assigned TA
(all portson which masterless F_Port trunking is notenabled).
all Displays configuration details for all ports on a switch.
switch:admin> porttrunkarea --enable 10-11 -index 11
2009/05/15-12:43:10, [SWCH-1012], 60, FID 128, INFO, sw0, Trunk Area (11) has
been enabled for one or more ports
Trunk area 11 enabled for ports 10 and 11.
switch:admin> switchshow
[...]
Index Port Address Media Speed State
==============================================
[...]
11 10 030b00 id
11 11 030b00 id
[...]
switch:admin> porttrunkarea --show enabled
Port Type State
-------------------------------------
10 -- --
11 -- --
switch:admin> porttrunkarea --disable 10-11
ERROR: port 11 has to be disabled
switch:admin> porttrunkarea --disable 10-11
Trunk area 11 disabled for ports 10 and 11.
Proto
N4 No_Light FC
N4 No_Light FC
Master TA DA
-- 11 10
-- 11 11
Fabric OS Command Reference
53-1001764-02