Portcfgcreditrecovery - Brocade Communications Systems 8 Command Reference Manual

portCfgCreditRecovery

Enables or disables credit recovery on a port.
Synopsis portcfgcreditrecovery --disable | --enable [slot/]port
Description Use this command to enable or disable credit recovery on a port.
The credit recovery feature enables credits or frames to be recovered. Only ports configured as
long distance ports can utilize the credit recovery feature. The default credit recovery configuration
is enabled.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
The Fabric OS port configuration commands are not supported on FCoE ports.
Operands This command has the following operands:
--disable
--enable
--help
Examples To enable credit recovery on a port:
To disable credit recovery on a port:
See Also portCfgShow
Fabric OS Command Reference
53-1001764-02
Disables credit recovery configuration on the specified port.
Enables credit recovery configuration on the specified port.
Displays the command usage.
switch:admin> portcfgcreditrecovery --enable 3/15
portcfgcreditrecovery --disable 3/15
portCfgCreditRecovery
2
641