Brocade Communications Systems 8 Command Reference Manual page 919

sysContact
authTraps
Security Level Parameters
The --show option displays the current SNMP GET security and SNMP SET security levels. Use
--set secLevel to modify existing settings:
SNMP GET security level
SNMP SET security level
Examples To display the SNMPv1 configuration:
To set the SNMPv1 configuration of a switch:
Fabric OS Command Reference
53-1001764-02
The contact information for this system (switch). The default value is Field
Support. Refer to the definition of sysDescr, sysLocation and sysContact in
the system group of MIB-II. The string must be at least 4 characters in length;
the maximum length is 255 characters.
When enabled, the authentication trap (authenticationFailure) is transmitted
to a configured trap recipient in the event that the agent receives a protocol
message that is not properly authenticated. In the context of SNMPv1 and
SNMPv2c, this means that a request contains a community string that is not
known to the agent. The default value for this parameter is 0 (disabled).
Specifies security level for all SNMP GET requests.
Specifies security level for SNMP SET requests only.
Values are: 0 No security.
1 Authentication only.
2 Authentication and Privacy.
3 OFF
switch:admin> snmpConfig --show snmpv1
SNMPv1 community and trap recipient configuration:
Community 1: Secret C0de (rw)
Trap recipient: 10.32.147.113
Trap recipient Severity Level: 0
Community 2: OrigEquipMfr (rw)
Trap recipient: 1080::8:800:200C:1234
Trap recipient Severity Level: 0
Community 3: private (rw)
No trap recipient configured yet
Community 4: public (ro)
No trap recipient configured yet
Community 5: common (ro)
No trap recipient configured yet
Community 6: FibreChannel (ro)
No trap recipient configured yet
switch:admin> snmpConfig --set snmpv1
SNMP community and trap recipient configuration:
Community (rw): [Secret C0de]
Trap Recipient's IP address: [0.0.0.0] 1080::8:800:200C:1234
Community (rw): [OrigEquipMfr]
string size must be between 2 and 16 - please re-enter
Community (rw): [OrigEquipMfr]
Trap Recipient's IP address: [1080::8:800:200C:1230] 10.32.147.113
Community (rw): [private]
Trap Recipient's IP address: [0.0.0.0]
2
snmpConfig
887