Perfaddusermonitor - Brocade Communications Systems 8 Command Reference Manual

perfAddUserMonitor

Adds a user-defined filter-based performance monitor.
Synopsis perfaddusermonitor [slot/]port "grouplist" [alias]
Description Use this command to define a custom filter for frame offsets and values.
For every offset, each group of comparison values is evaluated using the Boolean OR operator to
determine a match. If there are multiple offsets, each resulting OR function is evaluated using the
AND operator to determine if the entire statement is true, thereby incrementing the counter.
Execution of this command displays a numeric key that uniquely identifies the monitor. Use the
perfMonitorShow command for a listing of valid keys and user-defined aliases.
Notes This command is being deprecated along with the commands listed below. Use the new fmConfig
command instead.
•
•
•
•
•
•
•
For the perfMonitorShow and perfMonitorClear commands, only the management of Filter
Monitors is being deprecated (FLT class); these commands continue to be supported for managing
classes other than Filter monitors. Management of filter-based monitors is provided through the
new fmConfig interface.
While the legacy commands are still operational in the Fabric OS 6.4.0 release, their use is
incompatible with the new fmConfig command. Once you use the new command to configure and
manage filter-based monitors, you can no longer use the old commands. The legacy commands
and options will be removed in Fabric OS v6.5.0
This command requires an Advanced Performance Monitoring license.
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and
GbE ports.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
slot
port
Fabric OS Command Reference
53-1001764-02
perfAddIPMonitor
perfAddReadMonitor
perfAddRWMonitor
perfAddSCSIMonitor
perfAddWriteMonitor
perfDelFilterMonitor
perfShowFilterMonitor
For bladed systems only, this operand specifies the slot number of the port
on which the monitor is to be added, followed by a slash (/).
Specifies the number of the port on which the monitor is to be added, relative
to its slot for bladed systems. Use switchShow for a list of valid ports.
perfAddUserMonitor
2
567