Nszonemember - Brocade Communications Systems 8 Command Reference Manual

nsZoneMember

Displays the information on online devices zoned with a specified device.
Synopsis nszonemember pid | wwn
nszonemember -a | -u
Description Use this command to display information on all online devices zoned with the specified device. The
device can be specified by WWN or Port ID (PID). Use this command with the -u option to display all
unzoned devices in the entire fabric. Use the -a option to display online zoned device data for each
local device.
The command output displays the following information:
Type
Pid
COS
PortName
NodeName
Permanent Port Name
DeviceType
Port Index
Shared Area
Device Shared in Other AD
Additional lines may display if the device has registered any of the following information (the switch
automatically registers SCSI inquiry data for FCP target devices):
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
PID | WWN
-a
Fabric OS Command Reference
53-1001764-02
U - known, N - N_Port, NL - NL_Port.
The 24-bit Fibre Channel address.
A list of classes of service supported by the device.
The device's port world wide name (WWN).
The device's node WWN.
The physical N_Port or NL_Port WWN.
The device type.
The index of the port to which the device is attached.
Whether or not the device shares an area with other devices.
Whether or not the device is shared in other Admin Domains.
•
FC4 supported
•
IP address (node)
•
IPA
•
port and node symbolic name (local device only)
•
fabric port name
•
hard address or port IP address
Specifies the port ID or WWN of the device for which to display zoned devices.
Displays each local device's online zoned device data, including the device
PID and zone alias.
2
nsZoneMember
537