Brocade Communications Systems 8 Command Reference Manual page 322

2
fcrLsanMatrix
Examples For the following example, assume that the backbone has the following online edge fabrics (FIDs):
1, 2, 4, 5, 7, 8, 10 (currently, 14, 19 are not available). To add the LSAN Zone Matrix data:
To remove an entry:
To display the information from the cache:
To apply the changes persistently:
To view the persistent changes:
To view the LSAN Zone static and default/dynamic binding in the backbone where online fabrics
are: 1, 2, 4, 5, 7, 8, 10:
To display all proxy devices for all FC Routers in the same backbone fabric whether or not they are
relevant to this FC Router:
290
switch:admin > fcrlsanmatrix
switch:admin > fcrlsanmatrix --add 4 7
switch:admin > fcrlsanmatrix --add 10 14
switch:admin > fcrlsanmatrix --add 10 19
switch:admin > fcrlsanmatrix --remove 10 14
switch:admin > fcrlsanmatrix --display
Fabric ID 1
------------------------------------
4
4
10
switch:admin > fcrlsanmatrix --apply -lsan
switch:admin > fcrlsanmatrix -lsan
LSAN MATRIX is activated
Fabric ID 1
--------------------------------------
4
4
10
switch:admin > fcrlsanmatrix --fabricview -lsan
LSAN MATRIX is activated
Fabric ID 1
--------------------------------------
4
4
10
Default LSAN Matrix:
1 2 8
switch:admin > fcrproxydevshow -a
Proxy WWN
Created
in Fabric
52 10:00:00:06:2b:0e:4d:e5
add 4 5
--
Fabric ID 2
5
7
19
Fabric ID 2
5
7
19
Fabric ID 2
5
7
19
Proxy Device
PID Exists
in Fabric
01f001
Physical State
PID
78 4e0000 Imported
Fabric OS Command Reference
53-1001764-02