Brocade Communications Systems 8 Command Reference Manual page 354

2
ficonShow
Link Incident Description
Link Incident Type
Listener PID
Listener Port Type
Listener Port WWN
Listener Type
Manufacturer
Model Number
Node Parameters
Parameters
Parm
322
Same as Link Incident Type.
Indicates the link incident type as one of the following:
•
Bit-error-rate threshold exceeded
•
Loss of signal or synchronization
•
NOS recognized
•
Primitive sequence timeout
•
Invalid primitive sequence for port state
Same as PID.
Same as Port Type.
Displays the channel HBA port world wide name.
Indicates the listener type as follows:
Conditiona This port receives a link incident record if no other recipients from the
established registration list have been chosen.
Unconditional This port is always chosen as a recipient of a link incident record.
Displays the manufacturer name or code.
Displays the model number.
Same as Parameters.
Displays the node type for the switch in three bytes, 0xAABBCC:
Byte AA 0x20 FC-SB-2 and updates.
Byte BB 0x0a Switch.
Byte CC 0x00 Port number. It is dynamically assigned whenever a link incident occurs.
Displays the incident node parameters type in three bytes, 0xAABBCC:
Byte AA 0x00
0x20
0x40
0x60
0x80
0xa0
0xc0
0xe0
Byte BB 0x00
0x01
0x02
0x03
Reserved.
FC-SB-2 and updates.
Other FC-4s including FCP and updates.
FC-SB-2 and updates and other FC-4s including FCP and updates.
FC-4 support not specified.
Reserved.
Reserved.
Vendor-specific.
Unspecified class.
Direct access storage device, if it is a storage port; otherwise, not
channel-to-channel capable.
Magnetic tape, if it is a storage port; otherwise, a reserved field for
a channel port.
Input unit record, if it is a storage port; otherwise, a reserved field
for a channel port.
Fabric OS Command Reference
53-1001764-02