Brocade Communications Systems 8 Command Reference Manual page 781

To display the state of a VE_Port on a chassis with an FX8-24 blade:
To display port status for a GbE port on a Brocade 7800:
To view xlate domains, you must issue the command on a Brocade 7500/7500E or a chassis with
an FR4-18i blade. Note that the Front Domain ID is what is shown:
Fabric OS Command Reference
53-1001764-02
switch:admin> portshow 7/12
portIndex: 140
portName:
portHealth: No Fabric Watch License
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x490b
LOGICAL_ONLINE LOGIN LED
portType: 12.0
portState: 1 Online
Protocol: FC
portPhys: 255 N/A
port generation number:
state transition count:
portId: 018c00
portIfId: 43720806
portWwn: 20:8c:00:05:1e:7a:7a:00
portWwn of device(s) connected:
Distance: normal
switch:admin>
switch:admin> portshow ge2
Eth Mac Address: 00.05.1e.54.b1.17
Port State: 1 Online
Port Phys: 6 In_Sync
Port Flags: 0x4003
Port Speed: 1G
switch:admin> portshow 8/4
portName:
portHealth: No Fabric Watch License
Authentication: None
EX_Port Mode: Enabled
Fabric ID: 20
Front Phantom: State: OK
Cur Dom ID: 160 WWN: 50:00:51:e3:60:ee:0e:14
Pr Switch Info: Dom ID: 5
WWN: 10:00:00:05:1e:34:02:04
Fabric params: R_A_TOV: 10000
Authentication Type: None
Hash Algorithm: N/A
DH Group: N/A
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
portDisableReason: None
PRESENT ACTIVE VIRTUAL E_PORT G_PORT U_PORT
portScn: 16 E_Port
1048
26
PRESENT ACTIVE LED
E_D_TOV: 2000
portShow
PID fmt: core
2
749