Brocade Communications Systems 8 Command Reference Manual page 165

Fabric os command reference manual supporting fabric

Hide thumbs Also See for 8:

Table of Contents

The configure command runs in interactive mode and presents you with a series of hierarchical

menus. Each top-level menu and its associated submenus consist of a text prompt, a selection of

valid values, and a default value (in brackets).

The following keys control the execution of the command:

Interrupt (Ctrl-C)

End-of-file (Ctrl-D)

The following parameters can be modified with the configure command:

Switch Fabric Settings

Fabric settings control the overall behavior and operation of the fabric. Some of these settings,

such as the domain, are assigned automatically and may differ from one switch to another in a

given fabric. Other parameters, such as buffer-to-buffer credit or timeout values, can be modified to

suit specific applications or operating environments but must be in agreement among all switches

to allow formation of the fabric.

Enable a 256 Area Limit

WWN Based persistent PID

Allow XISL Use

Data Field Size

Sequence Level Switching

Disable Device Probing

Suppress Class F Traffic

Per-frame Route Priority

Long Distance Fabric

Disable FID Check

Insistent Domain ID Mode

Fabric OS Command Reference

53-1001764-02

When entered at a prompt with no preceding input, the command accepts the

default value (if applicable) and moves to the next prompt.

Aborts the command immediately and ignores all changes made.

When entered at a prompt with no preceding input, terminates the command

and saves changes made.

lists the switch fabric settings that can be modified.

Configure command fabric parameters (* = multiplication symbol)

E_D_TOV * 2 to 120000

1000 to R_A_TOV / 2

0 to R_A_TOV / 4