Brocade Communications Systems 8 Command Reference Manual page 194

2
cryptoCfg
--show -hacluster
Function 4. Storage device configuration and management
Synopsis cryptocfg --help -devicecfg
cryptocfg --create -container disk | tape crypto_target_container_name EE_node_WWN [EE_slot]
target_PWWN target_NWWN
[-initiator initiator_PWWN initiator_NWWN [initiator_PWWN initiator_NWWN]...]
cryptocfg --delete -container crypto_target_container_name
cryptocfg --failback -EE current_node_WWN [current_slot]
new_node_WWN [new_slot]
cryptocfg --move -container crypto_target_container_name new_node_WWN [new_slot]
cryptocfg --add -initiator crypto_target_container_name
initiator_PWWN initiator_NWWN [[initiator_PWWN initiator_NWWN]...]
cryptocfg --remove -initiator crypto_target_container_name initiator_PWWN [initiator_PWWN...]
cryptocfg --add -LUN crypto_target_container_name LUN_Num | LUN_Num_Range
[initiator_PWWN initiator NWWN [initiator_PWWN initiator NWWN]...]
[-lunstate encrypted | cleartext] [-keyID keyID]
[-encryption_format native | DF_compatible]
[-encrypt | -cleartext] [-enable_encexistingdata | -disable_encexistingdata]
[-enablerekey time_period | -disable_rekey]
[-key_lifespan time_in_days | none] [-newLUN]
162
The following operands are supported with the --replace command:
HA_cluster_name
Specifies the HA cluster member to be replaced. The HA cluster name must
be specified when this operand is used. This operand is optional. It is not
needed if the encryption engine to be replaced is not part of an HA cluster.
current_node_WWN [slot]
Specifies the WWN of the encryption engine to be replaced. This operand is
required. On bladed systems, include the encryption engine slot number.
new_node_WWN [slot]
Specifies the WWN of the encryption engine that is to replace the current
encryption engine. This operand is required. On bladed systems, include the
encryption engine's slot number.
Displays the specified HA clusters in the encryption group and associated
state information for all HA clusters or for a single, specified HA cluster. When
invoked on a member node, only the committed HA cluster configuration is
displayed. When invoked on the group leader, both defined and committed
configuration data is displayed.
The following operands are mutually exclusive:
-all Displays configuration information for all HA clusters.
HA_cluster_name
Displays configuration information for a specified HA cluster.
Fabric OS Command Reference
53-1001764-02