Brocade Communications Systems 8 Command Reference Manual page 531

--show
--help Displays the command usage.
Examples To create a base switch:
To create a logical switch identified by fabric ID 2:
To create a base switch with FID 2 without confirmation:
To delete a logical switch:
Fabric OS Command Reference
53-1001764-02
-f | -force Executes the command without confirmation. This operand is optional.
Displays the partition configuration on a switch or chassis. Without any
operands, the command displays all logical switches and the FC ports
assigned to them. For each switch, the FID and switch role are displayed:
base switch (BS) or default switch (DS). The following operands are optional
with the --show option.
-ge Displays partition configuration information for GbE ports. This operand is
valid only on the Brocade 7800/FX8-24 and the Brocade
7500/7500E/FR4-18i platforms.
-provision Displays the partition configuration for all slots, regardless of the slot's status.
This operand is valid only on a chassis and can be used with or without the
-ge option.
switch:admin> lscfg --create 1 -base
Creation of a base switch requires that the proposed new base switch on this
system be disabled.
Would you like to continue [y/n]?: y
About to create switch with fid=1. Please wait...
Switch successfully created.
Logical Switch has been created with default configurations.
Please configure the Logical Switch with appropriate switch
and protocol settings before activating the Logical Switch.
switch:admin> lscfg --create 2
About to create switch with fid=2. Please wait...
Switch successfully created.
Logical Switch has been created with default configurations.
Please configure the Logical Switch with appropriate switch
and protocol settings before activating the Logical Switch.
switch:admin> lscfg --create 2 -base -force
About to create switch with fid=2. Please wait...
Switch successfully created.
Logical Switch has been created with default configurations.
Please configure the Logical Switch with appropriate switch
and protocol settings before activating the Logical Switch.
switch:admin> lscfg --delete 2
All active login sessions for FID 2 have been terminated.
Switch successfully deleted.
2
lsCfg
499