Brocade Communications Systems 8 Command Reference Manual page 987

To configure the thresholds for memory usage monitoring:
To display the current memory usage and configuration:
To configure the threshold for monitoring system CPU usage:
To display the current memory usage threshold:
See Also fwHelp, portFencing, portThConfig, thConfig
Fabric OS Command Reference
53-1001764-02
Custom:
Default:
Low:
Custom:
Default:
Buffer:
Custom:
Default:
switch:admin>sysmonitor --config mem -poll 10 -retry 3 -limit 60 -action snmp,raslog \\
-high_limit 70 -low_limit -40
switch:admin>sysmonitor --show mem
Showing Memory Usage:
Used Memory
Total Memory
Free Memory
Used Memory Limit
Low Used Memory Limit : 40%
High Used Memory Limit: 70%
Polling Interval
No Of Retries
Actions
switch:admin>sysmonitor --config cpu -poll 20 -retry 4 -limit 70 -action snmp
switch:admin>sysmonitor --show cpu
Showing Cpu Usage:
Cpu Usage
Cpu Usage limit
Number of Retries
Polling Interval
Actions
TimeBase: None
Value : 100
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog
TimeBase: None
Value : 90
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Value : 0
Value : 0
: 192020k 25%
: 768080k
: 576060k
: 60%
: 60 seconds
: 3
: none
: 21.9%
: 75%
: 4
: 120 seconds
: none
2
sysMonitor
955