Brocade Communications Systems 8 Command Reference Manual page 66

2
ag
To disable managed fabric name monitoring in port group 3:
To get the current fabric name monitoring timeout value:
To set the fabric name monitoring timeout value to 30 seconds:
AG Preferred port information commands
To display preferred port settings for F_Ports:
To delete secondary port mapping for F_Ports 7, 8 and 9:
To set secondary port mapping for F_Ports 7, 8 and 9:
ADS Policy commands
To set the list of allowed devices for Ports 11 and 12 to 'no access':
To set the list of allowed devices for Ports 1, 10 and 13 to 'all access':
To remove two devices from the lists of allowed devices for ports 1 and 9:
34
switch:admin> ag --pgdelmodes 3 "mfnm"
Managed Fabric Name Monitoring mode has been disabled for Port Group 3
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode
-----------------------------------------------
0 pg0 lb,mfnm
3 FirstFabric lb
-----------------------------------------------
switch:admin> ag --pgfnmtov
Fabric Name Monitoring TOV: 120 seconds
switch:admin> ag --pgfnmtov 30
switch:admin> ag --prefshow
F_Ports
------------------------------------------
10;11
12;13
4;6
7;8;9
------------------------------------------
switch:admin> ag --prefdel "7;8;9" 3
Preferred N_Port is deleted successfully for the F_Port[s]
switch:admin> ag --prefset "7;8;9" 3
Preferred N_Port is set successfully for the F_Port[s
switch:admin> ag–-adsset"11;12"""
WWN list set successfully as the Allow Lists of the F_Port[s]
switch:admin> ag–-adsset"1;10;13""*"
WWN list set successfully as the Allow Lists of the F_Port[s]
switch:admin> ag –-adsdel "3;9" "22:03:08:00:88:35:a0:12;22:00:00:e0:8b:88:01:8b"
WWNs removed successfully from Allow Lists of the F_Port[s]
N_Ports F_Ports
0;2 4;5;6
1;3 10;11
Preferred N_Port
0
1
2
3
Fabric OS Command Reference
53-1001764-02