Brocade Communications Systems 8 Command Reference Manual page 234

2
defZone
--allaccess
--show
Examples To create a default zone configuration:
See Also none
202
Sets the default zone access mode to All Access, initiates a zoning
transaction (if one is not already in progress), and deletes the reserved
zoning objects by performing the equivalent to the following zoning
commands:
cfgDelete "d_efault_Cfg"
zoneDelete "d_efault_Zone"
A cfgSave, cfgEnable, or cfgDisable command must be performed
subsequent to the use of this command to commit the changes and
distribute them to the fabric. If a cfgSave is performed and the fabric is
already in the No Access default zone state, a cfgDisable is sent to the fabric.
For example
primaryfcs:admin> defzone
primaryfcs:admin> cfgsave
An audit log record is generated for each use of this command.
Displays the current state of the default zone access mode
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration
primaryfcs:admin> defzone
primaryfcs:admin> cfgsave
primaryfcs:admin> defzone
Default Zone Access Mode
committed - No Access
transaction - No Transaction
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration: (No Access)
:
allaccess
--
noaccess
--
show
--
.
Fabric OS Command Reference
53-1001764-02