Portloginshow - Brocade Communications Systems 8 Command Reference Manual

Fabric os command reference manual supporting fabric
Hide thumbs Also See for 8:
Table of Contents

Advertisement

2

portLoginShow

portLoginShow
Displays port login status of devices attached to the specified port.
Synopsis
portloginshow [slot/]port
Description
Use this command to display port login status received from devices attached to the specified port.
For each login, this command displays the following fields:
Type
PID
WorldWideName
credit
df_sz
cos
Further information about each login is displayed after these columns, including the Port ID of the
well-known address or N_Port that was the target of the PLOGI, if applicable.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
This command is not applicable to embedded FCoE ports. Use fcoeLoginShow.
Operands
This command has the following operands:
slot
port
Examples
To display the logins received by Port 23 (revealing one FLOGI (type fe) and two PLOGIs):
See Also
fcpProbeShow, portShow
718
Type of login can display one of the following:
fd
FDISC, Discover F_Port Service Parameters or Virtual N_Port login.
fe
FLOGI, Fabric Login to Fabric F_Port.
ff
PLOGI, Port Login to specific N_Ports or well-known addresses like Name
Server.
The 24-bit Port ID of the attached device.
The port's world wide name.
The credit for this login as appropriate. This is BB (buffer-to-buffer) credit for
Flogs and EE (end-to-end) credit for PLOGIs.
The default frame size for this login.
Class of Services supported. This can be a combination of the following bits:
4
Class 2 is supported.
8
Class 3 is supported.
For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
Specify the port for which to display login status information, relative to its
slot for bladed systems. Use switchShow for a list of valid ports.
switch:admin> portloginshow 23
Type
PID
World Wide Name
=====================================================
fe
201700
21:00:00:e0:8b:05:a3:c9
ff
201700
21:00:00:e0:8b:05:a3:c9
ff
201700
21:00:00:e0:8b:05:a3:c9
credit df_sz cos
3
2048
8
scr=1
0
0
8
d_id=FFFC20
0
0
8
d_id=FFFFFC
Fabric OS Command Reference
53-1001764-02

Advertisement

Table of Contents
loading

Table of Contents