Secstatsshow - Brocade Communications Systems 8 Command Reference Manual

Fabric os command reference manual supporting fabric

Hide thumbs Also See for 8:

Table of Contents

secStatsShow

Displays one or all security statistics.

secstatsshow [name[, "domain[;domain]"]]

Use this command to display one or all security statistics. This command can be issued on any

switch to display local security statistics. If an FCS policy is enabled and secStatsShow is issued on

the primary FCS switch, this command can retrieve and display the security statistics for any or all

switches in the fabric.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

When invoked without operands, this command displays the security statistics on the local switch

or chassis. The following operands are optional:

Specify the name of the security statistic you want to view. The specified

policy name must be capitalized. If executed on the primary FCS, specify an

asterisk (*) to represent all security policies in the fabric. Valid values for this

operand are:

TELNET_POLICY

RSNMP_POLICY

WSNMP_POLICY

SERIAL_POLICY

FRONTPANEL_POLICY

INVALID_SIGN

INVALID_CERT

SLAP_BAD_PKT

Fabric OS Command Reference

53-1001764-02