Brocade Communications Systems 8 Command Reference Manual page 715

To display FCIP parameters on the Brocade 7800 (with IPv6 support):
To display the VLAN tagging configuration only:
Fabric OS Command Reference
53-1001764-02
switch:admin> portcfgshow ge2
Mode:
Persistent Disable:
Ipif configuration:
Interface IP Address
----------------------------------------------------
0 192.168.2.10
1 192.168.2.12
2 192.168.2.13
3 192.168.2.11
4 192.168.2.110
Interface IPv6 Address
--------------------------------------------------------
0 20::2:10
Iproute Configuration:
IP Address Mask
------------------------------------------------------
192.168.42.0 255.255.255.0
IPv6ddress Len
-------------------------------------------------------
20:42:: 64
Vlantag configuration:
-------------------------
Interface Address
Destination Address
------------------------------------------------------
192.168.2.10
192.168.2.10
switch:admin> portcfgshow vlantag ge2
Port: ge2
Vlantag configuration:
-------------------------
Interface Address
Destination Address
---------------------------------------------------
192.168.2.20
192.168.2.21
FCIP
OFF
NetMask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Gateway
192.168.2.250
Gateway
20::2:250
VlanId
0.0.0.0
192.168.2.21
VlanId
200
0.0.0.0
300
192.168.2.10
portCfgShow
MTU
1500
1500
1500
1500
1500
Len MTU
64 1500
Metric
0
Metric
0
L2CoS
200 5
300 5
L2CoS
5
5
2
683