Brocade Communications Systems 8 Command Reference Manual page 879

Examples To create an FCS policy:
To create a device policy to allow two devices to attach to domain 3 ports 1 and 3 (the WWN of first
device is 11:22:33:44:55:66:77:aa and the WWN of second device is 11:22:33:44:55:66:77:bb):
To create a SCC policy in a Fabric with three switches:
1. Check if a policy exists.
2. Identify switches in the fabric.
3. Create a SCC policy that includes switches with domain IDs 2 and 4.
4. Activate the policy.
To create an SCC policy that includes all switches in the fabric:
See Also fddCfg, distribute, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyDelete,
secPolicyDump, secPolicyRemove, secPolicySave, secStatsShow
Fabric OS Command Reference
53-1001764-02
primaryfcs:admin> secpolicycreate "FCS_POLICY", "3; 4"
FCS_POLICY has been created.
While creating the FCS policy, the local switch WWN is automatically included in the list.
Switches included in the FCS list are FCS switches and the remaining switches in the fabric are
non-FCS switches. Out of the FCS list, the switch that is in the first position becomes the
Primary FCS switch and the remaining switches become backup FCS switches. If the first
switch in the FCS list is not reachable, the next switch becomes the Primary.
primaryfcs:admin> secpolicycreate "DCC_POLICY_aB_7",
"11:22:33:44:55:66:77:aa;11:22:33:44:55:66:77:bb;3[1,3]"
DCC_POLICY_abc has been created.
switch:admin> secpolicyshow
____________________________________________________
ACTIVE POLICY SET
____________________________________________________
DEFINED POLICY SET
switch:admin> fabricshow
Switch ID Worldwide Name
-------------------------------------------------------------------------
2: fffc02 10:00:00:05:1e:39:5f:67 10.32.69.53
4: fffc04 10:00:00:05:1e:04:ef:0e 10.32.69.49
200: fffcc8 10:00:00:05:1e:35:cd:ef 10.32.69.117
switch:admin> secpolicycreate "SCC_POLICY","2;4"
SCC_POLICY has been created.
switch:admin> secpolicyactivate
About to overwrite the current Active
ARE YOU SURE (yes, y, no, n): [no] y
secpolicyactivate command was completed successfully.
switch:admin> secpolicycreate "SCC_POLICY",*
SCC_POLICY has been created.
secPolicyCreate
Enet IP Addr FC IP Addr
10.20.30.53 "NeptuneSec"
fec0:60:69bc:60:260:69ff:fe80:d4a
10.20.30.49 >"SW4900_Sec"
fec0:60:69bc:54:205:1eff:fe04:ef0e
10.20.30.117 "nSW4100_98"
Policy Set.
2
Name
847