Brocade Communications Systems 8 Command Reference Manual page 669

Examples To configure the internal addresses for the CP and GbE port inband management interfaces:
To add a route to a management station that is on the same subnet as the management interface
IP addresses in the previous example:
To configure a route for a management station that is on a different subnet (note the added
gateway IP address):
See Also portCfgShow, portCmd, portShow, switchShow, configure, fastWriteCfg
Fabric OS Command Reference
53-1001764-02
switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0
switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0
switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0
switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0 192.168.1.250
2
portCfg
637