Tstimezone - Brocade Communications Systems 8 Command Reference Manual

tsTimeZone

Displays or sets the system time zone.
Synopsis tstimezone --interactive
tstimezone timezonename
tstimezone --old hourOffset [, minuteOffset]
Description Use this command to display or set the system time zone.
All switches maintain the current time zone setup in nonvolatile memory. Changing the time zone
on a switch updates the local time zone setup and is reflected in local time calculations.
All switches are by default in the 0,0 time zone:, which is, GMT. If all switches in a fabric are located
in the same time zone, you may leave the default time zone setup.
Time zone is used in computing local time for error reporting and logging. An incorrect time zone
setup does not affect the switch operation in any way.
System services started during the switch boot reflect a time zone change only at the next reboot.
The time zone can be specified in two ways, by name or in an hours and minutes offset format:
1. The offset format is specified with the --old option, followed by an hour offset value and
2. The time zone name format uses the timezone database, which automatically adjusts for
By default, the switch is in offset mode (--old), with zero offsets, that is, time is displayed in GMT.
Use tsTimeZone timezonename to change the offset format to the timezone name format.
When executed without parameters, this command displays the current time zone configuration in
the format in which it was set.
•
•
When Virtual Fabrics are enabled, the hardware clock is updated by the default switch in the
chassis, and the time zone set on any logical switch applies to all logical switches on the chassis.
The tsTimeZone command requires chassis permissions.
Since there is only one clock on the chassis, for the time server to function correctly, ensure that all
logical switches in the fabric have the same NTP Clock Server configured. This includes any
Pre-v6.2.0 switches in the fabric.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Fabric OS Command Reference
53-1001764-02
optionally a minute offset value.
Daylight Saving Time.
Negative hour offset values mean that the local time is behind GMT; for example, -8,0 is
GMT-08:00.
Positive hour offset values mean the that local time is ahead of GMT; for example, 3,0 is
GMT+03:00.
2
tsTimeZone
983