Replacing An Ip Phone 2002; Procedure 15 - Nortel 2033 Installation And Operation Manual

Page 108 of 600

Replacing an IP Phone 2002

553-3001-368 Standard 20.00
Nortel IP Phone 2002
2 If the node password is enabled and NULL, choose one of the following:
a. Disable the password.
b. Set the password as non-NULL.
3 Press OK when the node number displays.
If
the node password is enabled and
is not NULL
the node password is disabled
4 Enter the password at the password screen and press OK.
A TN screen displays.
Note: To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager:
System Administration (553-3001-332).
5 Select the Clear soft key to clear the existing TN.
6 Enter the new TN.
Two IP Phones cannot share the same TN. You must remove the
IP Phone 2002 that is currently using the TN.

Procedure 15

Replacing an IP Phone 2002

1 Obtain the node and TN information of the phone you want to replace.
2 Disconnect the IP Phone 2002 that you want to replace.
December 2006
Then
a password screen displays. Go to
step 4.
a TN screen displays. Go to
step 5.
End of Procedure
IMPORTANT!