Connecting The Ip Phone 2001 Components - Nortel IP Phone 2001 User Manual

Connecting the IP Phone 2001
components
Follow this procedure to connect the handset to the terminal, and to connect
the terminal to the LAN, and to a power source.
See IP Phone 2001 connectors (page
Procedure steps
Step
1
2
3
4
5
6
7
Copyright © 2006, Nortel Networks
CAUTION
Risk of equipment damage
Do not plug the IP Phone 2001 into a regular telephone jack.
This causes severe damage to the terminal. Consult your
system administrator to ensure that you plug your telephone
into a 10/100BaseT Ethernet jack.
Action
Connect one end of the handset cord to the handset jack (identified
with a handset icon) on the underside of the terminal.
Connect the other end of the handset cord the jack on the handset.
Connect one end of the CAT-5 line cable to the LAN Ethernet port
(identified with a LAN icon), located on the underside of the terminal.
Plug the other end of the CAT-5 line cable into the IP network.
Contact your installation technician for the proper power option. The
IP Phone 2001 can be powered by an AC adapter, or over a LAN.
Thread the cord around the strain relief, retaining hook and channel
provided for a secure power connection.
Secure the terminal footstand to the base.
Carrier VoIP
Nortel IP Phone 2001 User Guide
NN10300-005 06.04 Standard
(I)SN09U October 2006
15), for the location of the connectors.
Nortel Networks Confidential