614
C
38: DNS C
HAPTER
ONFIGURATION
n
Network diagram
Figure 179 Network diagram for dynamic domain name resolution
2.1.1.2 /16
2.1.1.1/16
DNS server
Configuration procedure
Before performing the following configuration, make sure that there is a route
■
between the device and the host, and configurations are done on both the
device and the host. For the IP addresses of the interfaces, see
This configuration may vary with different DNS servers. The following
■
configuration is performed on a Windows 2000 server.
1 Configure the DNS server
# Enter DNS server configuration page.
Select Start > Programs > Administrative Tools > DNS.
# Create zone com.
In
Figure
180, right click Forward Lookup Zones, select New zone, and then
follow the instructions to create a new zone com.
IP network
1.1.1.1 /16
Device
DNS client
3.1.1 .1/16
host.com
Host
Figure
179.