A Configuration Examples Of Voice Vlan Under Manual Mode - 3Com MSR 50 Series Configuration Manual

A Configuration
Examples of Voice VLAN
under Manual Mode
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] voice vlan mode auto
# Configure Ethernet 1/1 as a Hybrid port.
[DeviceA-Ethernet1/1] port link-type access
Please wait... Done.
[DeviceA-Ethernet1/1] port link-type hybrid
# Configure the default VLAN of the port as VLAN 6 and allow packets from VLAN
6 to pass through the port.
[DeviceA-Ethernet1/1] port hybrid pvid vlan 6
[DeviceA-Ethernet1/1] port hybrid vlan 6 tagged
# Enable the voice VLAN feature on the port.
[DeviceA-Ethernet1/1] voice vlan enable
[DeviceA-Ethernet1/1] return
Verification
# Display information about the OUI addresses, OUI address masks, and
descriptive strings.
<DeviceA> display voice vlan oui
Oui Address Mask
0001-e300-0000 ffff-ff00-0000
0003-6b00-0000 ffff-ff00-0000
0004-0d00-0000 ffff-ff00-0000
0011-2200-0000 ffff-ff00-0000
00d0-1e00-0000 ffff-ff00-0000
0060-b900-0000 ffff-ff00-0000
00e0-7500-0000 ffff-ff00-0000
00e0-bb00-0000 ffff-ff00-0000
# Display the current Voice VLAN state.
<DeviceA> display voice vlan state
Voice VLAN status: ENABLE
Voice VLAN ID: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 100 minutes
Voice VLAN enabled port and its mode:
PORT
--------------------------------
Ethernet1/1
<DeviceA>
Network requirement
Create VLAN 2 and configure it as a voice VLAN.
■
IP phone type is untagged with the Hybrid port Ethernet 1/1 being the access
■
port.
Voice VLAN Configuration Examples
Description
Siemens phone
Cisco phone
Avaya phone
test
Pingtel phone
Philips/NEC phone
Polycom phone
3com phone
MODE
AUTO
503