Using The Nurse Call Connection - Breas Vivo 3 Clinician Manual

Supplemental Oxygen Supply Requirements
Property
Maximum flow
Maximum pressure
Supply source
Connector
Connect the Oxygen supply
1 Connect the oxygen adapter (article no. 005032) to the oxygen supply's tube.
2 Connect the oxygen adapter to the oxygen port at the back of the Vivo 3. See 3.3
Ventilator Back , page 35 for detailed information.
3 If using a device for monitoring the oxygen saturation, connect it according to the
supplier instructions.
6.7.5

Using the Nurse Call Connection

The Vivo 3 can be connected to a nurse call system through a port on the accessory box.
When connected, alarms from the Vivo 3 will be forwarded to the nurse call system.
1 Connect the Accessory box to the Communication port at the back of the Vivo 3.
2 Connect the nurse call cable to the Nurse call/ Remote alarm port on the accessory
box.
Doc. 007232 Y-2
Requirement
30 l/min.
100 kPa
Source equipped with rotameter. Exam-
ples of supply sources:
• Oxygen cylinder
• Central oxygen supply
• Oxygen concentrator
The oxygen source shall be equipped
with the Breas Low Pressure Oxygen
Adapter, art. no. 005032
How to Use the Vivo 3 83
Vivo 3 Clinician's Manual