6.5.1
Treatment Values Monitored by the Vivo 3
•
Flow
Flow is the constant flow for HFNT. It is the only monitored value when HFNT is
active.
•
Ppeak
P
peak
phase.
•
EPAP
EPAP (Expiratory Positive Airway Pressure) is the lowest pressure that is recorded during
the latest expiratory phase.
•
Leakage
Leakage is the average calculated leak (l/min) over the last breath, with a breath by
breath update.
•
MVe
Mve (Minute Volume, expiratory) is calculated as the Tidal Volume multiplied with the
Total Breath Rate.
•
Vte
Vte (Tidal volume, expiratory) is the expired tidal volume for each breath.
•
SpO2
SpO
ured by the SpO
This value is only displayed if the SpO
Displayed ranges: According to the manufacturer's specifications.
•
Pulse Rate
Pulse Rate displays the patients pulse rate as measured by the SpO2 module.
This value is only displayed if the SpO
Displayed ranges: According to the manufacturer's specifications.
6.6
Using Accessories
This section describes how to use accessories provided by Breas Medical AB.
6.6.1
Using the Attachable Humidifier
WARNING!
Read the section 2.7 Humidification and Heating — Warnings and Precautions, page 16 before
using the Vivo 3 with the attachable humidifier.
The humidifier is for single patient use only.
NOTE
The ventilator can also be used with active stand-alone and passive humidifiers
Doc. 007231 F-3
(Peak pressure) is the highest pressure that is recorded during the latest inspiratory
(Saturation of Peripheral Oxygen) displays the patient's oxygen saturation. as meas-
2
module.
2
module is connected.
2
module is connected.
2
How to Use the Vivo 3 43
User Manual