Figure 7-6:Vpm Mapping Changes Made (Scsi Devices) - ADIC Scalar 100 User Manual

LUN in the Assigned LUN column. When a target device has been mapped, it
appears gray in the Available LUN column (see Figure 7-6).

Figure 7-6:VPM Mapping Changes Made (SCSI Devices)

6. The ADIC Gateway's persistent device map contains the product ID, Vendor
ID and Serial Number of SCSI devices it knows about. This information can be
read in the Data panel of the ADIC Management Console when the device is
highlighted in Tree View (see Figure 7-4).
When the SCSI devices are read by VPM, only the assigned LUN, the SCSI
channel, the target ID, and the target LUN are displayed (see Figure 7-5).
Figure 7-6 shows SCSI devices assigned to specific LUNs that the SCSI host
has access to.
7. You must drag the Command and Control LUN over to the Assigned LUN
column. For more information on channel numbering, see "Channel Number
Reference" on page 321.
8. When you are satisfied with the changes you have made to the device map,
press
154
. If you do not want to retain the map, press
OK
.
Cancel
Mapping Devices With VPM