ADIC Scalar 100 User Manual page 264

200.0.0.42 socrates
200.0.0.45 plato
200.0.0.47 fred
Note: The host file does not exist until you enter the host " add " command.
Gateway > host "add","plato","200.0.0.45"
Gateway >
host delete
"
The host " delete " command deletes the named host from the hosts table and
hosts file. If the hostname is an alias, then only the alias is removed. If
hostname is the official host name, the entry and all aliases are removed.
The host utilities maintain a host file, ffs:/mgnt/hosts, which is used at
system startup to initialize the network hosts table. This table associates network
names with IP addresses. Use of the hosts table is entirely optional, but might
facilitate frequently needed connections. Each host entry is a single line of the
format:
IP-address
where
The following is an example of host file contents.
192.168.1.90 bruno
200.0.0.42 socrates
200.0.0.45 plato
200.0.0.47 fred
Gateway > host "delete", "plato"
Gateway >
host list
"
The host " list " command prints the content of the hosts file.
248
hostname
","
official_host_name
IP-address
official_host_name is the first name selected for this host.
nicknames
"
"
nicknames ...
is a text string in standard IP Address format
(i.e., 10.0.0.2).
is an optional list of additional aliases for the
host (separated by spaces).
host "delete","hostname"