ADIC Scalar 100 User Manual page 155

Host Name:
Host Type:
Host Connection: Indicates the way the host has mapped its connection to the
Host WWN:
Entering Host Parameters
Usually the name of the computer on the Local Area Network
(LAN). System administrators use this name to refer to the
host.
The type of host, version of the operating system software
and the Service Pack Level (NT/Windows 2000) or patch
level (e.g., Solaris, AIX). Select the arrow at the right of the
Host Type field to choose the appropriate entry from the pull-
down list.
ADIC Gateway. It is typically a representation of the host
SCSI mapping to bus, target and LUN. It also identifies the
type of HBA.
The World Wide Name of the HBA or Initiator. The WWN is a
unique identifier that also contains a manufacturer field. If
you are entering this number manually, you must enter a
colon after the first eight characters of the WWN for the ADIC
Management Console to accept your entry, even if the
139