ADIC Scalar 100 User Manual page 230

Table 9-1: Post-Repair Checklist
Step
8
214
Actions
Perform the following:
1. Start the ADIC
Management
Console server
and client, logon
with administrator
privileges and
connect to the
ADIC Gateway
2. If you downloaded
new firmware in
Step 5 of "Updating
the ADIC
Gateway" on
page 212, use the
Controls > Update
menu
Firmware
item to update the
firmware now.
3. Use the
Tools >
Load SAN Gateway
menu item to load
the persistent
address map into
the ADIC Gateway.
4. Use the
Controls >
Restart SAN
menu item
Gateway
to restart the ADIC
Gateway.
5. Use the
Controls >
Disconnect SAN
menu
Gateway
item.
Comments and References
This step must be performed if you replaced
the ADIC Gateway Base.
Post-Repair Checklist