ADIC Scalar 100 User Manual page 265

The host utilities maintain a host file, ffs:/mgnt/hosts, which is used at
system startup to initialize the network hosts table. This table associates network
names with IP addresses. Use of the hosts table is entirely optional, but might
facilitate frequently needed connections. Each host entry is a single line of the
format:
IP-address
where
The following is an example of host file contents.
Gateway > host "list"
192.168.1.90 bruno
200.0.0.42 socrates
200.0.0.45 plato
200.0.0.47 fred
value = 0 = 0x0
Gateway >
hostNameSet
The hostNameSet command changes the network name of the ADIC Gateway.
The shell prompt will be set to the new host name.
Gateway > hostNameSet "foster"
Target hostname set to foster
value = 0 = 0x0
foster >
hostTypeShow
The hostTypeShow command displays the host type setting for each Fibre
Channel. The possible host types are "nt" "aix" "solaris" "hp-ux" "netware"
"gateway" "switch" "generic" "unisys" "as400" "autosense/nt" "fcr-2" and "pv-136t-
fc"
Gateway > hostTypeShow
FC 1: Type 2 – nt
FC 4: Type 1 – solaris
hostNameSet
official_host_name
IP-address
official_host_name is the first name selected for this host.
nicknames
nicknames ...
is a text string in standard IP Address format
(i.e., 10.0.0.2).
is an optional list of additional aliases for the
host (separated by spaces).
249