Figure 5-3: Initial Tree View - ADIC Scalar 100 User Manual

Figure 5-3: Initial Tree View

The ADIC Management Console's main screen is made up of two panels, the Tree
View panel on the left and the Data panel on the right. The Tree View in Figure 5-
3 is an unexpanded Tree View for a single ADIC Gateway. For an expanded view,
see Figure 5-9. Because the ADIC Gateway with IP address 192.168.30.10 is
selected, it is shown in Tree View with blue highlighting. Its Name is
"Gateway3010" and its Genre is "SANGateway."
On the right hand side of the screen, at the top of the Data panel, is a
representation of the ADIC Gateway's Channel configuration as it appears on the
back of the ADIC Gateway
Product data for the selected ADIC Gateway is displayed textually below the
Channel configuration graphic.
Near the bottom of the screen, the Up Time for the selected ADIC Gateway is
displayed. Up Time indicates how many hours, minutes and seconds have
elapsed since the ADIC Gateway was last booted.
The area at the very bottom of the screen is used to display status messages. See
"View Menu Group" on page 68 for further information.
65
Starting the ADIC Management Console