ADIC Scalar 100 User Manual page 279

has completed, the ADIC Gateway copies the firmware modules to nonvolatile
flash memory. The ADIC Gateway must be rebooted to use the updated firmware.
Gateway > rz
**B000000023be50
Firmware Update in Progress....
Found Image File BOOTROM.IMG – loading
.........Found Image File IPOST.IMG – loading
.........Found Image File SPOST.IMG – loading
Firmware Update Complete. Reboot for Update to Take Effect.
value = 0 = 0x0
Gateway >
The example below shows the rz command when it is used to
receive a file that contains configuration parameters. See also
the sz command for information about sending a configuration
file.
Gateway > rz
**B000000023be50
Configuration Update in Progress....
Configuration Update Complete. Reboot for Update to Take Effect.
value = 0 = 0x0
Gateway >
scsiAltIdGet [channel]
The scsiAltIdGet command displays the alternate ID number for a specified
channel. If no channel is specified, alternate IDs are displayed for all SCSI
channels.
Gateway > scsiAltIdGet
SCSIbus
SCSI 1
SCSI 2
value = -1 = 0xffffffff
Gateway >
scsiAltIdGet [channel]
AltId ------- ---------------
1
6
263