Device Mapping; Figure 5-64: Fibre Channel Default Settings - ADIC Scalar 100 User Manual

node. The frame size should typically be set to 2048. (It may be appropriate to use
another frame size if required by a particular software application.)

Figure 5-64: Fibre Channel Default Settings

Figure 5-64 shows the default Port Mode setting, which is "Target." The default
connection option is "Loop." You have options for changing the port mode and
connection.
When you are finished viewing or setting Fibre Channel parameters, you can
press the button to make your changes take effect immediately. If you press
Reset
the button, you will be reminded that a or are required for the
OK Reset Reboot
changes to take effect. Press to keep your changes and return to the main
OK
screen. Press to abort your changes and return to the main screen.
Cancel

Device Mapping

Using the ADIC Management Console, you can edit the ADIC Gateway's
persistent address map database and customize the LUN assignment for each
target device. Select the ADIC Gateway in Tree View and then select
Device
from the pull-down menu. You may also access the Device
Mapping Controls
110
Controls Menu Group