ADIC Scalar 100 User Manual page 263

Gateway >
hlthChkNow
The hlthChkNow function causes the ADIC Gateway to execute an immediate,
level 4 Health Check. Results are displayed that will indicate which devices or
subsystems failed the check.
Gateway > hlthChkNow
Health Check: Starting level 4 check
Health Check: Step 1 -- Checking System
Health Check: Step 2 -- Checking Interfaces
Health Check: Step 3 -- Checking Devices
Health Check: Step 4 -- Checking Device States
Health Check: Passed
value = 0 = 0x0
Gateway >
host add
"
The host " add " command adds the named host to the host table and host file. If
the IP address is already assigned to a host, then the new name is added as an
alias for the host. The host " add " command is invoked to add known hosts and
their IP addresses. Alias names are supported, allowing multiple names to a
single host.
The host utilities maintain a host file, ffs:/mgnt/hosts, which is used at
system startup to initialize the network hosts table. This table associates network
names with IP addresses. Use of the hosts table is entirely optional, but might
facilitate frequently needed connections. Each host entry is a single line of the
format:
IP-address
where
The following is an example of host file contents.
192.168.1.90 bruno
hlthChkNow
, hostname ,
" " " "
official_host_name
IP-address
official_host_name is the first name selected for this host.
nicknames
ipAddress
"
nicknames ...
is a text string in standard IP Address format
(i.e., 10.0.0.2).
is an optional list of additional aliases for the
host (separated by spaces).
247