ADIC Scalar 100 User Manual page 297

ADIC Gateway. When the ADIC Management Console is running, it inserts its
address into the table automatically. The broadcast address for the Ethernet port
is also automatically included in the table.
Gateway > trapDestRemove "10.0.0.2"
value = 0 = 0x0
Gateway >
trapDestShow
The trapDestShow command allows you to view the SNMP trap destination
table maintained within the ADIC Gateway. When the ADIC Management Console
is running, it inserts its address into the table automatically. The broadcast
address for the Ethernet port is also automatically included in the table
Gateway > trapDestShow
Trap Destination IP Address
---------------------------
192.168.30.255
206.0.64.17
206.0.64.25
206.0.64.35
206.0.64.255
value = 1 = 0x1
Gateway >
udpstatShow
The udpstatShow command displays UDP statistics for the Ethernet network.
Interpreting these statistics requires detailed knowledge of Internet networking
protocols. This information may be useful to the LAN administrator.
Gateway > udpstatShow
UDP:
8514 total packets
8445 input packets
69 output packets
0 incomplete header
0 bad data length field
0 bad checksum
8383 broadcasts received with no ports
0 full socket
value = 15 = 0xf
Gateway >
trapDestShow
281