Ethernet; Service Port; Enclosure; Power Supply Unit - ADIC Scalar 100 User Manual

Ethernet

The 10/100 Base-T Ethernet port has an RJ-45 connector for out-of-band
management. It can be connected to a network hub using an unshielded twisted-
pair Ethernet cable. The Ethernet port complies with the IEEE 802.3 specification.

Service Port

The service port is an RS-232 connection with a 9-pin D-shell connector (DTE). It
is compatible with serial ports on personal computers.
The service port is used for local service and diagnostics when you use a terminal
session to the shell interface.
The service port is configured at 19,200 Baud, 8 data bits, no parity and XON/
XOFF. It connects to the host serial port with a 9-pin to 9-pin null modem cable.

Enclosure

The enclosure is designed for strength, durability, and electromagnetic and radio
frequency interference (EMI/RFI) immunity.
The external dimensions are:
It is available with standard 19-inch Rack Mount or Desk Top configuration kits.
The enclosure has two ball bearing cooling fans that draw air in through the side
of the enclosure. The exhaust is on the opposite side.
Two temperature switches monitor the internal temperature of the enclosure. One
switch indicates a temperature warning at 60°C and the other indicates a
temperature alarm at 70°C.
The enclosure has an Enclosure Monitor Register facility. It monitors the status
and health of all components of the enclosure and reports it to the ADIC
Management Console. Status is also displayed on the front panel LED indicators.

Power Supply Unit

The power supply is an auto-sensing universal power supply nominally supporting
power between 100 -127 VAC and 200-240 VAC, at a frequency of 50/60 Hz, with
a maximum input power rating of 90W.
18
• 2U (3.5") high
• 11" deep
• 16.73" (standard 19" rack) wide
Hardware Product Description and Features