ADIC Scalar 100 User Manual page 290

showScsiAssign
Lists the current assigned addresses for the indicated channel. If channel is
omitted, or is 0 (zero) then all assignments are shown for all Target channels.
sncFeatureEnable "licensekeystring"
The sncFeatureEnable command enables the optional Data Mover feature.
You enable the feature by entering the unique license key.
Gateway > sncFeatureEnable "BVRXC-G79DN"
value = 0 = 0x0
Gateway >
If the license key was factory-installed, you can enter the word "enable" rather
than the actual license key.
Gateway > sncFeatureEnable "enable"
value = 0 = 0x0
Data Mover License is Valid
Gateway >
If value = 1 = 0x1 message is displayed, it means the license is already
installed and Data Mover is already enabled.
If the value = -1 = 0xffffffff message is displayed, it means the license
is not already installed and you do need to enter the license key.
snmpCommunitiesShow
The snmpCommunitiesShow command displays the list of SNMP community
strings in use by the ADIC Gateway.
Gateway > snmpCommunitiesShow
ReadCommunity
-----------------------------
pub
ReadCommunity
-----------------------------
public
icmp
WriteCommunity
-----------------------------
priv
private
TrapCommunity
274
ViewIndex
1
ViewIndex
1
2
ViewIndex
1
1
showScsiAssign