ADIC Scalar 100 User Manual page 295

targets
The ADIC Gateway maintains a list of target devices that are attached to the I/O
channels. The targets command will list each device currently attached,
providing descriptions of the devices.
Gateway > targets
Idx Tdev
----------------------------------------------|----------------
-------------------
0 0xc194a400 DISC, Inc. SAN Gateway Local 0252 | Cmd/Cntrl
Status 0h
2 0xc1ffc390 IBM
flags 7h
3 0xc1ffc290 IBM
value = 4 = 0x4
Gateway >
tcpstatShow
The tcpstatShow command displays TCP statistics for the Ethernet network.
Interpreting these statistics requires detailed knowledge of Internet networking
protocols. This information may be useful to the LAN administrator.
Gateway > tcpstatShow
TCP:
301 packets sent
targets
Vendor Product
03570C11
03570C11
Idx
Tdev
Vendor
Product
Rev
Type Specific
278 data packets (18371 bytes)
0 data packet (0 byte) retransmitted
23 ack-only packets (22 delayed)
0 URG only packet
Rev | Type Specific
5324 | Tape: Blk Size 32768 ,
5324 | Changer: flags 7h
Device Index in the target list.
An internal pointer, used for some diagnostic
operations
The content of the Vendor ID field from the
SCSI Inquiry Data
The content of the Product ID field from the
SCSI Inquiry Data
The content of the Revision ID field from the
SCSI Inquiry Data
For each device type, information pertinent
to the device
279