ADIC Scalar 100 User Manual page 256

fcShow [level]
The fcShow command displays the channel status for each Fibre Channel
interface.
Level
0 or
<blank>
1
2
------------------------------------------------------------
-----------------------------------------------------------
CtlrId:PCI Addr:ISP Type:Firmware State:Version:Loop ID:FabricAttached
PortMode
------------------------------------------------------------
1 : 00 18 00 : 2300 :
2 : 00 18 00 : 2300 :
3 : 00 18 00 : 2300 :
4 : 00 18 00 : 2300 :
5 : 00 18 00 : 2300 :
6 : 00 18 00 : 2300 :
--------------------------------------------------------------
value = 80 = 0x50 = 'P'
Gateway >
240
sets the verbosity level to the display in the example below
displays the information displayed below, and appends a break-
out for each channel that includes Node Type, Node Name, Port
Name and Port ID
displays the information included at levels 0 and 1, and appends
loop ID link stats
Fibre Channel Controllers
Ready
Ready
Ready
Ready
Ready
Ready
Ctlr Id
PCI Addr
ISPType
Firmware State
• Configuration Wait
• Waiting for AL_PA
• Waiting for login
Meaning
: 2.01.7 : 1 :
: 2.01.7 : 1 :
: 2.01.7 : 1 :
: 2.01.7 : 1 :
: 2.01.7 : 1 :
: 2.01.7 : 1 :
Indicates the Port Number for this interface.
The PCI address of the interface, showing
bus, device id, and function number.
The type of Fibre Channel Controller.
The current state of the interface as reported
by the Fibre Channel PMC adapter firm-
ware. Firmware states are listed below.
Firmware is not initialized.
Firmware is performing or
waiting to perform loop ini-
tialization.
Firmware is attempting port
:
No : Targ
No : Targ
No : Targ
No : Targ
No : Targ
No : Targ
fcShow [level]