ADIC Scalar 100 User Manual page 303

192: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
value = 0 = 0x0
Gateway >
vpsInactiveSet
The vpsInactiveSet command de-activates VPS making all LUNs available to
all host connections. This command typically would be used when troubleshooting
a SAN configuration. It removes VPS access control without deleting VPS access
settings. Use the vpsActiveSet command to re-activate VPS.
Gateway > vpsInactiveSet
value = 0 = 0x0
Gateway >
If VPS is already inactive, the following is displayed.
Gateway > vpsInactiveSet
VPS: Already Inctive
value = 23 = 0x17
Gateway >
vpsNameSet [hostindex],
The vpsNameSet command sets the host name field to the specified "name
string" for the specified host connection index. The following command example
shows setting the host name for host Id 1 to "LANDERS". Existing hostindex and
name values can be determined by looking at the "Id" and "Host Name" columns
in the output of the vpsShow -1 command.
Gateway > vpsNameSet 1,"LANDERS"
value = 0 = 0x0
Gateway >
vpsShow [hostIndex]
The vpsShow command displays information about hosts that have been
registered with Virtual Private SAN based on the value of hostIndex.
Hostindex
-1
vpsInactiveSet
Tip: You can enter vps as a shortcut for vpsShow -1.
Displays brief list of all known host connections
name string
" "
Meaning
287