ADIC Scalar 100 User Manual page 249

The above example shows the clearReservation command being used to
clear a reservation on a target device at LUN 4.
cleHelp
The cleHelp command displays a list of the Command Log Event facility
commands.
Gateway
CLE - Command Log Event facility
cleShow <lun> - Displays Logged Events for a specific LUN
cleShowAll
value = 0 = 0x0
Gateway
cleShow <LUN>
The cleShow command displays the last 64 Command Log events for a device at
the specified LUN. This log is not maintained for disk devices because the
performance impact is significant. The manufacturer may request the contents of
the command log for diagnostic purposes. Information about interpreting these
events is not provided.
cleShowAll
The cleShowAll command performs a cleShow for all LUNs. The manufacturer
may request the contents of the command log for diagnostic purposes.
Information about interpreting these events is not provided.
copyScsiAssign [source channel], [dest channel]
Copies the SCSI assignments from a source channel to a destination channel.
dataScrubberDisable
Issue this command to disable the Memory Scrubber, an independent low-priority
task that checks the full data buffer space, approximately once per hour.
Gateway
value = 0 = 0x0
Gateway
cleHelp
> cleHelp
- Displays Logged Events for All LUNs
>
> dataScrubberDisable
>
233